What To Do With Your Grafted Queen Cells... Make a Nuc

OK, it has been eleven days since I grafted the queens in the last post to my blog. Those eleven days plus the three or four days (most likely three) makes fourteen or fifteen days since the grafted larvae were laid as eggs. It takes sixteen days from egg to queen so we need to do something with the queen cells quickly. Pictured below is some cells I grafted last year. I got in a hurry today and used and sold most of my queen cells before I remembered to take any pictures so I'll use this old picture so you can see what to expect if you do a fairly decent job when you are grafting your larvae.



One of the great things about rearing queens is that it gives you many more options for which you wish to do with your bees. I used some of the cells to replace some queens I sold a few days ago. One cell was used to replace a queen I accidentally killed while marking. It's hard to admit but I do mess up pretty badly sometimes. When replacing queens that were sold or if I'm simply requeening the acceptance rate of queen cells is pretty much guaranteed. After a colony realizes it is queenless you can give it a queen cell with a queen which shall soon emerge you do not need to worry about acceptance. Like I said, it is guaranteed when the queen emerges from her cell within the colony.

Now today I made some nucs since I had some queen cells. I put the old queens in with the nucs and used the queen cells for the colonies. This method may be somewhat opposite of what most beekeepers would do (I'll explain a little more in detail later), however I find that with a smaller population of bees in the nuc that it will not suffer without a laying queens and will build up nicely. The colony from which the nuc is made can handle the absence of a laying queen better than the nuc. The colony can sometimes benefit from not having a laying queen. I have in the past purposely removed a queen prior to a good nectar flow in order to allow the bees in the colony to concentrate on gathering nectar, drawing out supers, and making honey rather than spending all of their time feeding larvae. After the flow you can reintroduce the queen or allow the colony to requeen itself. Remember to always cutout capped queen cells four days after removing the queen from the colony or you may choose to leave the colony queenless for a longer amount of time if necessary to accommodate the nectar flow. The important thing to remember is that you remove the queen at seven days before the flow hits so most of the brood will be capped, nine days is actually more preferable. I would not recommend a novice beekeeper to attempt this. However if you feel that you have enough skill you should try it sometime because you may be impressed what a strong colony can do without having to take care of larvae during a strong nectar flow. OK, enough talk of this. I'm way off subject so let's get back on track.

I went to my outyard at the black raspberry patch to make a few nucs and took my camera along.



The raspberry patch is only a few acres big and I only have four colonies there at the present. I really wish I would have had more colonies there because I feel that I could have harvested more than the eleven supers of raspberry honey I got. I definitely feel that I would not have got nearly this much honey if the bees had to draw their own comb. It is important to save all of your drawn comb to reuse. Drawn comb is almost like gold to me. The raspberries were in bloom for slightly less than two weeks but I can still find a scarce bloom here and there. Shortly after the berries bloomed I grafted the queens so I could make some nucs right after I harvested the surplus honey after it had cured and was capped. The key to getting an early crop of honey from the raspberries is to have strong colonies. This is achieved by feeding your colonies syrup and pollen patties to the point where the brood chamber is full of "syrup honey", bee bread, brood, and bees. If you would like to know how to strengthen your colonies to get an early crop of honey refer back to my posts on Feeding Pollen Patties To Your Colonies, Feeding Inside a Colony, and Strengthening a Weak Colony. You must start making preparations in late February or early March to make sure that you can get an early crop instead of a bunch of swarms, or no swarms, or even some late winter dead outs from starvation. Also, if you need to know how to make syrup and pollen patties for your bees refer to Recipes for Beekeepers.

OK, so when the honey supers with drawn comb went on the colonies the feeding of syrup stops during the flow. We do not want syrup in the honey supers. After the flow the supers are removed. Then it is time to make some nucs. This is all about timing. Knowing your bloom dates, the life cycle of the bees (required for raising queens on a specific timetable), and having the proper equipment (nuc boxes, preferably drawn comb) ready to go is very crucial at this juncture.

Let's put the nuc together. First a good frame of honey is selected.



Now I need two frames of brood. These frames can be one of open brood (eggs and larvae) and one with capped pupae or two frames with a mixture of open and closed brood. The frame pictured below was selected due the fact that it had the queen on it. It also had open and sealed brood, honey, and bee bread which made it a good frame to select.



And another frame of brood is selected.



The nuc is finished off with a frame of drawn comb.



All that is left to do to the nuc is to put the lid on. The entrance was sealed with screen before any bees were added.



The main colony now requires a queen cell for it is queenless.



I prefer to place the cell between the top bars near the center of the colony. This cell was placed between the fifth and sixth frames of the lower hive body. If you choose to let the queen remain in the parent colony you can place the queen cell into the nuc in the same manner as described above. Be sure that your nuc is in place and will not be moved when you put the queen cell in it or it could get damaged from the top bars should they be moved any.



I got lucky when I found the queen to make this nuc. She was on the fifth frame I looked at. I already had the honey frame in place, the the brood frame with the queen, another brood frame, and a frame of drawn comb. It was a very easy nuc to put together. I had to replace the frames I took from the main colony to make the nuc. Luckily I had some empty frames of drawn comb. When you save your comb and keep it safe from wax moths it makes things so much easier on your bees. This picture is of the top hive body after taking the frames from it to use in the nuc.



The thing to do when you put frames back into the hive body is to center the remaining frames within the box and put the empties toward the outside. This helps to consolidate the brood near the center of the hive. After the upper hive body is back in place it is time to put the inner lid and feeders back in place.



With the feeders in place the must be filled to feed the bees. I now have a short amount of time to coerce the colony into filling the empty frames I gave them before the next nectar flow which will be tulip poplar.

Taking some brood from this colony will set it back some but not too badly. Taking the queen from the colony has set back more than taking some bees and brood from it has. The good thing about it is that this colony will not be set back as far as it would have if it had swarmed. In a sense, I made it swarm, or made an "artificial swarm". Most beekeepers make artificial swarms as a last ditch effort to stop a colony from swarming after it has made swarm cells and gone through the preparations to swarm. My reasons for doing this is because I want more colonies, to stop a swarm before it starts, and to requeen a colony with a new queen. Some beekeepers would not dream of doing this before the main honey flow starts. Then again, these are the same people who will most likely have their colony swarm and lose half their colony up in a tall tree and then lose their honey crop because there was not enough bees left in the colony to take advantage of the honey flow.

There are many things to consider in beekeeping. There is no "right" or "perfect" answer to every situation. This is why beekeeping is an art to be performed at the discretion of the beekeeper. One of the many things to consider is what kind of goals do you have concerning your bees. Most beekeepers goals are to let the bees make surplus honey and then harvest that honey. If this is your goal I hope you are working to achieve it. Don't let your bees do all the work. You can be proactive and share the burden. Don't be one of those guys who only goes out to his colony just add a super when needed and then take them off in July, if your lucky enough to get anything. Be one of those guys who starts feeding in late February or early April. Look in the brood chamber and see what's going on. What if your colony is pollen bound? What if you got sac brood? What if you got swarm cells? What if you have a queen that lays very poorly? What if the colony is infested with mites and on the verge of collapse? Please go out and look in your hives, and I don't mean tomorrow.. See what's happening in there. Maybe you need to make an artificial swarm so you don't lose half your bees and half or all your honey. Maybe you find a bunch of swarm cells and could use them to make some nucs, or put them in some mini nucs, or use one in a queenless hive before it becomes a drone layer. The list goes on and on. Be proactive with your bees, be a beekeeper.

I really did not intend to talk about a bunch of stuff other than making a nuc and what to do with a queen cell. It is just hard to contain my enthusiasm, especially this time of year when the bees are bringing in nectar. I love it. I hope you love it too.

Grafting Queens

At one time or another every beekeeper will need to requeen a colony. Some will requeen annually. Queens can be costly for a beekeeper so why not raise some yourself out of your best colony? I prefer raising my own queens because I know what kind of bees I have. I do not know what kind of bees the queen breeder on the other side of the country has for twenty dollars a piece.

There traits you must consider when selecting a queen to graft from. If gentleness is important to you be sure to select for it. Hygienic behavior is important for colony health. Fecundity and a solid brood pattern are important. Honey and wax production need to be top notch. Disease resistance is a valuable trait though I doubt most beekeepers are going to submit their colonies to being tested with a disease to see if it is resistant. These are a few of the things to consider when selecting a queen to graft from. Since you are grafting for yourself you should decide what is most important to you and try to breed for it.

Once you have prepared a Cell Builder Colony you can add a frame with your freshly grafted larvae. Pictured below is my cell builder colony.



My cell builder also has a shallow super full of bees to be placed atop the deep hive body.



Here is a picture of the cell bars with the queen cups in place. The queen cups are where the grafted larva are placed.



Here is a picture of the cell bar frame. The cell bars slide into the slots on the end bars of the frame. The queen cups are faced down to simulate a natural queen cup within a colony.



Also in the above picture are some Chinese grafting tools in the coffee cup. They are submerged in water so they can easily be cleaned of the royal jelly they encounter while in use.

Now it is time to do some grafting. First we must select a frame with larvae of appropriate age from the colony we wish to graft from. This frame looks like it is acceptable.



In the picture above you can see the royal jelly in the bottom of the cells along with a very small larva. The larva which is most desirable are the ones which have not curled into a "C" yet. These are the youngest larvae. It is a good idea to graft your larvae of all the same size so the queens will hatch at about the same time. I have grafted queens which were curled with good results before. The main thing is to graft all your larvae of the same age, or size, and to make sure not to graft any which do not have any royal jelly in their cell. If they do not have any royal jelly do not use the larvae. They are too old, to big, and their diet of royal jelly has been interrupted and will result in an inferior queen. You can click on the picture above to see the larvae in their pools of royal jelly in the bottom of their cells. If you look hard enough you can see the ones which have not curled yet and are very ripe for grafting. Ideally you would want to graft the larva after it hatches from an egg, which is at three days. I have found that as long as all the larvae that is grafted are of the same size and are still being fed royal jelly that they will make good queens. The only thing that will vary is how long it takes for them to hatch out. The youngest larvae are more desirable because it is easier for the beekeeper to time out when the queens will emerge from their cells.

Here is a picture of me using the Chinese grafting tool to graft the first larvae. The Chinese grafting tool has a flexible tip which slides under the larva and removes it along with some royal jelly from the cell.



The Chinese grafting tool has a push button on the end similar to an ink pen which when it is depressed it will push the royal jelly containing the larva in the queen cup. I've used other types of grafting tools but the Chinese grafting tool is the easiest to use.



In the queen cup to the right is the first larva that has been transferred. You can click on the picture to enlarge it. You can then see how small the larva is. You may need to get some magnification glasses from your optometrist to graft the small larva. Fortunately for now I can do it unaided from any optical devices.



On the end of the Chinese grafting tool you can see a small pool of royal jelly. Within that pool is a very tiny larva. You'll have to take my word for it because it is nearly impossible to see even when you enlarge the picture.



Here is a picture of all queen cups filled with larvae.



Now the cell bars are ready to be placed into the cell bar frame.



And now the cell bar frame with its freshly grafted larvae is ready to be placed into the cell builder colony.



After the cell builder colony is put back together it is important to give it some sugar syrup. The extra syrup will help the bees make the wax for the queen cells. Also make certain that the cell builder colony has a frame of pollen. The bees need the pollen to make royal jelly for the larvae if they are to become queens. These queens should start hatching about twelve to thirteen days after I grafted them.

Grafting or raising queens is easy to do and every beekeeper at one time or another should do their best to make their own queens. I spent maybe twenty minutes at the most breaking the cell builder down, finding the frame with larvae to graft from, grafting the larvae, taking pictures, and putting everything back together. I'm raising eighteen queens for myself to make some nucs with. Most places charge close to twenty dollars for a queens. Provided all eighteen queens hatch out, I made $360 in twenty minutes, or $1080 an hour for grafting those queens. Of course this example is not quite fair because the queens you pay twenty dollars for are mated, or they should be. So my virgin queens are probably worth only ten dollars a piece. I guess I can buy some frames or foundation with the money I saved. Saving money is not my main objective for raising queens. My main objective is to raise a queen that I want. I don't want bees from Texas, bees from California, bees from down south, or bees from anywhere else. I want to continue raising my own feral queens that I captured here in southern WV. I doubt if I'll be seeing any of these queens available in Bee Culture or American Bee Journal so I will continue to raise my own.

Queen Marking

Why mark your queens? There are a few reasons a beekeeper should keep his queens marked. The number one reason many novice beekeepers like to have their queens marked is that it makes the queens easier to find. More experienced beekeepers can usually find the queen with ease and do not need them marked to find them. The big reason to have marked queens is so you know how old the queen is. Many people like to requeen every year. Some people like to requeen every two years. It is known that young queens display higher levels of fecundity and produce more pheromone. Colonies with older queens are more likely to swarm due to the lack of queen pheromone. Young queens produce a pheromone that prohibits the worker bees from making queen cells. The older a queen becomes the less pheromone she produces. If you like catching swarms and losing your honey crop keep some old queens in your colonies.

Another reason for having marked queens is to ensure that you have the same queen that you put in your colony the last time you requeened. I don't know how many times I heard someone say they bought some Italians (for example) off of such and such queen breeder and that they were not worth having. My first question is usually, "Are your queens marked?" When they say, "No," I ask how they even know that the queens in their hives are the same ones they requeened with. The truth is they don't know. Recent studies have revealed that colonies that are requeened have high levels of supersedure and chances are that the queen in the colony that is getting trash talked probably is a totally different queen that has bred with who knows what kind of drones. This is a very good reason to keep your queens marked so that you know exactly what kind of bees you are keeping in your hives.

I've raised a few queens already this year and marked a few today. I decided to take a few pictures to demonstrate how this is done so you can keep your queens marked, if you want to. The queen pictured below is close to a month old.



When catching the queen it is extremely important not to grab her by the abdomen. The abdomen is full of eggs and is very fragile. The way to grab the queen is by the thorax. Remember that you can click on the pictures to enlarge them if you want to see the pictures in more detail.



A queen marking kit is relatively inexpensive and makes the job of marking the queen a cinch. I ordered my queen marking kit from Walter T Kelley Company. Here you can see that I am putting the queen into the tube.



Once the queen is in the tube the plunger is then inserted to enclose the queen within the tube.



The next step is to push the queen against the screen on the end of the tube. Once again this must be done very gently. Only enough force to hold the queen against the screen should be applied.



You see that the kit was used last year from the red paint. Green is the color for 2009. I use Testor's model paint. A toothpick works well. I like to use what is handiest though, and a piece of a twig is really handy thing here where I live. I apologize for the blurry picture but if you could see clearly I am using a twig to color the thorax of the queen.



After applying the paint, give the queen some space to within the tube. I usually set the marking kit on the end of a bee brush to allow her to dry before giving her back to the colony.





After a few minutes the paint is dry and the queen is ready to be returned to her colony.



The easiest way to let her into the colony is to jet let her walk out of the tube on her own. Letting her walk out on her own means there is one less chance of her being injured from a clumsy beekeeper handling her. Believe me, it is easy to injure a queen so be careful. Remember that you can click on the picture to enlarge it if you want to see the queen.



Hopefully this will encourage some of you to start marking your queens. If you order your own queens and have them shipped already marked you may think that you have nothing to worry about, but remember that when a colony swarms you will have a queen that needs to be marked. So let's just do yourself a favor and keep your queens marked so you know what kind of bees you have and how old your queens are.

Raising Queens Without Grafting

Have you ever wanted to raise your own queens? Even if you can't graft larvae or have the equipment to do it, you can raise own queens. This comes in handy early in the year when it is nearly impossible to order queens from the big queen suppliers. I'll let you in on the easiest way I know to raise queens. The picture below is of a split I made on March 30, 2009. This picture was taken on April 3, 2009.



When using this method to raise queens it is imperative to open the colony and cut out any capped queen cells four days later. That is why this picture was taken four days after I made the split, because I'm getting ready to cut out the capped cells. First off, you must carefully inspect each frame for cells. Just a few bees gathered around a cell can hide it from your view so look very carefully. If the one capped cell gets by you it will hatch out first and kill your better queens.

Why does one cut out capped cells after four days? Wouldn't it be better if it hatched out so I could have a queen that much sooner? NO! It is very important that the new queen be fed a rich diet of royal jelly after it hatches into a larva from an egg. In order to ensure that your queen is reared from a very young larva you must cut capped cells at four days after making a split.On the fourth day after the egg is laid it hatches into a larva. Once it has been decided by the workers to raise a queen from it, it takes eight days from egg before the queen cell is capped. Queens can be raised from larvae as old as seven days. The larva between five and six days old are the ones we wish to eliminate by cutting out the capped cells four days after making the split.

What's wrong with a queens that was raised from a larva that was between five and seven days old? There is enough wrong with them that I shall continue cutting out the capped cells at four days. People commonly requeen their old queens with fresh quality queens annually. Why would you want a less than quality queen. Queens raised from larvae that are too old can lay fertilized eggs. However they have lower ovarian weight, are smaller, are weaker, lay less eggs, produce less pheromone and are therefore more aggressive, lay patchy or shotty brood patterns, are superseded rather quickly, just to name a few. These make bad queens because they were not continually fed royal jelly from the time they hatched until the time they were capped. If she lays fewer eggs than a quality queen then your going to get less honey because you have less bees.

Though this method of raising queens may produce what is referred to as "emergency queens", it does not imply that they are inferior. When they become inferior is when they are raised from larvae that is too old. This will produce what is sometimes called a "semi-queen" or "intercaste". These type of queens come from the true "emergency" cells. That is why we must cut out all capped cells after four days from making the split or nuc.

Pictured below are some queen cells along the bottom of the frame. These cells are still open and can be left alone.



I only found two capped queen cells that needed to be cut out. As you can see these cells are rather small in size and would no doubt make some small inferior queens.



Here is a picture of three queen cells from another split I made on the same day as the the one pictured above.



If you would like to sit up a colony to raise some queens please refer to my previous post on making a split. After you make the split do not add a queen or queen cell. Four days later go in and cut out the capped cells. If you only want four queens and they are making twelve, cut out some of the smaller cells. I like to do this because it makes me feel as if the queen cells remaining will receive more royal jelly than they would otherwise and that they end up being slightly better than they would otherwise. But when I make queen cells like the one pictured below I doubt if I'm going to start second guessing myself.



Though raising queens through this method is easy, you lose the ability to decide how many queens are raised and can not ensure they eggs were laid on the same day. The queen cells are also sometimes easily damaged when handling. When you graft you can virtually eliminate these problems which makes it a desirable skill to have. But if you only need a few at a time this is by far the easiest way to let the bees raise a queen.

Splitting a Colony

There is a quick and easy way to split your colonies. You can simply separate your hive bodies into two colonies. Take the top deep and put it on a floor with a lid. Let whichever half raise its own queen and not worry about them. This is the easy way. However, I like to have more control over what happens to my colonies. I like to leave the existing colony with the new queen, queen cell, or maybe it's raising its own queen, in the old location. I prefer to put the old queen in a new location. When doing this be sure to put extra bees with the old queen as many of them will drift back to their old location. As long as you have enough brood in the split you should not lose many bees. It is OK when some of the bees drift back to their original location because there is going to be an interruption of egg laying in that colony so some extra bees are a good thing. If you have a mated queen she should be accepted and laying eggs within a few days. A ripe queen cell will take around ten days. If you let them make a new queen you could be looking at nearly 28 days before any eggs are laid. So let's make sure we have enough bees depending on how we are going to queen the split.

When splitting a colony one must first ensure that the colony to be split is of sufficient strength. I usually will not split a colony which has less than eight frames of bees. Splitting a colony before it swarms is an easy way not to lose a swarm. It is also an easy way to increase colony numbers. After choosing a colony to be split I like to smoke the colony well and let the colony sit for a few minutes before beginning work.



Letting a colony sit for five minutes or so after smoking it will give the bees enough time to fill themselves with honey because they think they may need to leave the hive due to fire because they smell the smoke. Bees with a belly full of honey are less likely to be aggressive because they feel important to the colony's survival. Dry bees, or bees with empty bellies, can get pretty nasty sometimes so it is important to use your smoker properly when going into a colony.

After smoking the colony and before opening it, be sure to gather all the necessary hive components needed to make the split.



In the picture above you can see two deep hive bodies, hive base, floor, inner lid, and outer lid. Also there are twenty frames of drawn comb. Drawn comb is a beekeeper's best friend when making early splits. Bees need to consumes an estimated eight pounds of honey in order to produce one pound of wax. When making early splits it is essential to feed your bees even when using drawn comb. Here you can see that I am removing the inner lid with two jars of 1:1 sugar syrup placed over the ventilation hole.



In addition to sugar syrup, it is also imperative to provide the split with pollen. You can use a good pollen substitute or in my case I am using frames of drawn comb which contains bee bread. In order for the colony to raise one frame of brood it must have one frame of nectar and one frame of pollen available to feed the larva. So make sure your bees have resources available especially when making splits before the honey flow.

So now I'm going to tear the hive down in order to split it. The top super contains bees and brood. I will sit it aside for the time being.





Pictured above is the colony to be split after the shallow super on top was removed.

The top deep hive body contains nearly five frames of bees.



Now it is time to examine the lower deep hive body for content.



The lower hive body appears to have a little more than four frames of bees.



After separating the individual hive bodies it is time to sit up a new hive to transfer some frames of brood, honey, and the old queen into.



Pictured below is a frame which has been drawn out for drone brood. Drone comb is easy to spot out due to the larger size of the cells. Early in the season is does not do much good to replace this frame with foundation because the foundation will most likely be drawn into drone comb as well. Later in the season the bees are less likely to build drone comb, but for now I will replace this frame of drone comb with a frame of drawn worker comb. It is important not to simply throw away the drone comb. It can be used in a drone mother colony for breeding queens, can be used to catch varroa mites, or can be used to store honey above a queen excluder.



Here is a frame with some fresh pollen. I will put this frame into the new box.





I also want to select a few frames of brood to put into the new box.



A few frames of nectar, or sugar syrup, with bees are also essential to the split.



After putting enough bees and brood into the new box I fill in the rest of the space with drawn worker brood.





The above hive is the one I want to put the old queen in. After having gone through all the frames in order to make the split, I still have not found the queen. So I looked through the shallow super and found her in there. You can see her near the middle of the frame. Remember that you can click on the pictures to enlarge them if you want to see the pictures in more detail.



An easy way to put the queen into the split would be shake her off of the frame. I would rather pick her off the frame and place her into the split by hand. This way she does not get shook too hard or suffer an accident from being shook. It is important when handling queens not to ever hold one by the abdomen. They are very easily injured when they are full of eggs. I prefer to hold them by their thorax when handling them. All I had to do was simply place her onto a top bar and she disappeared in the hive body.



After placing the queen into the split a second deep hive body with drawn comb was added. This is the colony pictured below on the right. Pictured on the left is what remains of the original colony minus the shallow super.



The hive on the left will have a ripe queen cell added to it. It is always handy to have some queen cells on hand if you aspire to split your hives or make nucs. Queen cells are also nice to have should you decide to requeen your colonies. As a beekeeper you can save yourself a considerable amount of money by rearing your own queens. First I need to select a cell to place into the colony. This cell looks like a nice big one.



I have in the past cut a piece of comb from the frame large creating a space large enough to accommodate the queen cell. However I have had just as much success by placing the queen cell between the top bars and using a small amount of pressure from the top bars to hold it in place. I also prefer to place the cell above the most crowded or congested area in the hive.



Pictured below is two queen cells between the top bars.



I made this split on April 12, 2009. In a few more days I will have new bees hatching out from the new queen. The queen cells were from a split I did on March 30, 2009.

After placing the queen cells in place it was time to put the hive back together. The super went back on, then the inner lid, and the feeders.



The hive is topped off with a shallow super and a shim to accommodate the feeders. An outer lid seals it up.



The hive below on the left was the original colony which now has some ripe queen cells. The middle hive has the old queen and should not have its brood laying interrupted too much. Some bees will drift back to the original location. But once again, that is OK. Since it could take near ten days for the new queen to start laying eggs the colony will benefit from some extra bees. The colony with old queen is already hatching out bees which were laid after the split and is steadily increasing in population. It will not be much longer before I can split this colony again. The colony with the queen will most likely be split before the end of the month.

I hope this helps explain in some detail on how to split a colony. If you enjoyed this post please show your appreciation by clicking on the google sponsored advertisements. Thanks.